SVBONY 1.25”/2”/36mm Filter UV/IR Cut Telescope Optics Infra Red Filter for Astronomy Accessories

Svbony UV/IR Cut Filter Review

//vk.com/@dmitriy94vk-svbony-uvir-cut-125
cr:Dmitry Schikochikhin

SVBONY 1.25'' UV-IR Cut Filter Telescope Optics Infra Red Filter CCD Camera for Astronomy Monocular Binoculars Telescope

The SVBONY filter is a better choice for all digital imaging with digital cameras;DSLR camera;CCD cameras;modified Webcams and telescopes
The UV-IR-Cut filter uses the very latest coating technology to deliver the high filtration quality and lifetime durability
The UV-IR cut filter combine with any of the other Baader filters screws into the back of the eyepiece or camera adapter to block out the chromatic aberration unwanted
So it delivers the sharper images possible;it can also reduce the ghost images caused by IR radiation

Features:

1.True optical quality glass substrate and coatings
2.Very low reflection multi-coating, Striate-free, and plane-parallel substrate
3.Combine with any of the other Baader filters, to deliver the sharpest images possible
4.Standard 1.25 inch Filter threads for 1.25″ eyepieces and other accessories
5.Comes with a plastic box to keep it safe and clean when not in use
6.Interface Threads: M28.5*0.6

True optical quality glass substrate and coatings/Standard 1.25 inch/M28.5*0.6

Improve Image Sharpness

How to use it?

What can UV/IR CUT filters do for you?

Infrared or IR light is invisible to the human eye, so it is not a concern when you are using your telescope visually. However, when you add a camera to the mix, it's a whole other story. Unlike the human eye, a silicon sensor is very sensitive to light in the infrared portion of the spectrum, and that is a problem because infrared images are blurry as all get out. That means your nice, sharp visual light image is degraded by the addition of the infrared layer. This problem can easily be solved by blocking the infrared, and the SVBONY IR-Cut filter will do just that.
This filter is a must for all digital imaging with digital cameras CCD cameras and modified webcams. It's also useful for protecting valuable H-Alpha filters from heat stress and damaging IR (Daystar etc). Due to their extremely high optical quality these filters may be stacked and used far in front of the focal plane (necessary for imaging uses).
The UV-IR-Cut filter uses the very latest coating technology to deliver the finest filtration quality and lifetime durability.
Eliminates violet halos around bright stars (more effectively than simpler so-called Minus Violet photographic filters).

NOTE

Question:Can i use it with my eyepieces?
Answer:It is threaded to fit any 1.25″ eyepiece.

Question:Can this be used to see the eclipse?
Answer:No you would blind yourself using this filter to view an eclipse. You need a dedicated sun filter that fits over the telescope lens, not the eyepiece. Sun filters reject something like 99.9999% of the sunlight before it enters the telescope.

Buyers Show

Imaging telescopes or lenses: Sky-Watcher Mak 127/1500

Imaging cameras: ZWO ASI224MC

Mounts: Sky-Watcher AZ-GTi (EQ)

Software: Pixinsight · AstroSurface · SharpCap Pro

Filters: Svbony UV-IR Cut

Author:MarcoGiaco

QHY268C
SV198 Guide scope + 102ed f 7 + 0.8x
SVbony UV/IR cut

EQ6R-Pro
Bortle class 4
Light 360 sec x 30
dark 25
Flat 60
Dark Flat 60
Bias 60
Author:Kspiya